09-29-2015, 10:51 AM
REQUIREMENTS
*.The following guide that teaches you how to unbrick Redmi 2 is strictly made for the Redmi 2.
The firmware we are flashing is not to be flashed on any other device.
BEFORE WE BEGIN
*.You must have a Windows PC to follow this guide.
The tools don’t work on any other operating system like Mac .
*.Head to the Apps > Settings > Developer Options and check the USB Debugging Mode is already enabled.
It should be on by default; however, sometimes people have disabled the option in the past.
You cannot connect the Redmi 2 to the Windows computer without the USB Debugging working.
HOW TO UNBRICK THE REDMI 2
*.Download the Mitool Flashing tool.
*.Download the ROM Fastboot Redmi 2 package.
*.Extract (unzip) both folders to the desktop of the Windows PC.
*.Open the MIflash Tool.
*.Click the browse button from within the MIFlash tool.
*.Select Advanced from the menu.
*.Apply the following options in the appropriate fields:
*.Fastboot Script — flash_all.bat
NvBoot Script — leave it empty
Flash programmer — MPRG8916.mbn
Boot Image — 8916_msimage.mbn
RAW XML File — rawprogram0.xml
Patch XML File — patch0.xml
*.Click the OK button to close the box.
*.Connect the Redmi 2 to the same computer where you have just been working with the MIFlash tool.
*.Press the Volume Down + Power button on the Redmi 2 at the same time and wait for the software to pick up your device.
*.If you don’t have any luck getting the Redmi 2 to connect, click the Refresh button on the MIFlash tool and try again.
*.Once you are happy it’s connected, click the Flash button and wait for the flashing to complete.
*.Remove the battery after the flashing is finished.
*.Connect the battery and reboot your device.
You should now have successfully unbricked the Redmi2 smartphone by flashing a new firmware.
Link:Mitool Flashing tool
http://bigota.d.miui.com/tools/MiPhone20140509.exe
ROM Fastboot Redmi 2
http://bigota.d.miui.com/V6.5.2.0.KHJMIC...5d8206.tgz
*.The following guide that teaches you how to unbrick Redmi 2 is strictly made for the Redmi 2.
The firmware we are flashing is not to be flashed on any other device.
BEFORE WE BEGIN
*.You must have a Windows PC to follow this guide.
The tools don’t work on any other operating system like Mac .
*.Head to the Apps > Settings > Developer Options and check the USB Debugging Mode is already enabled.
It should be on by default; however, sometimes people have disabled the option in the past.
You cannot connect the Redmi 2 to the Windows computer without the USB Debugging working.
HOW TO UNBRICK THE REDMI 2
*.Download the Mitool Flashing tool.
*.Download the ROM Fastboot Redmi 2 package.
*.Extract (unzip) both folders to the desktop of the Windows PC.
*.Open the MIflash Tool.
*.Click the browse button from within the MIFlash tool.
*.Select Advanced from the menu.
*.Apply the following options in the appropriate fields:
*.Fastboot Script — flash_all.bat
NvBoot Script — leave it empty
Flash programmer — MPRG8916.mbn
Boot Image — 8916_msimage.mbn
RAW XML File — rawprogram0.xml
Patch XML File — patch0.xml
*.Click the OK button to close the box.
*.Connect the Redmi 2 to the same computer where you have just been working with the MIFlash tool.
*.Press the Volume Down + Power button on the Redmi 2 at the same time and wait for the software to pick up your device.
*.If you don’t have any luck getting the Redmi 2 to connect, click the Refresh button on the MIFlash tool and try again.
*.Once you are happy it’s connected, click the Flash button and wait for the flashing to complete.
*.Remove the battery after the flashing is finished.
*.Connect the battery and reboot your device.
You should now have successfully unbricked the Redmi2 smartphone by flashing a new firmware.
Link:Mitool Flashing tool
http://bigota.d.miui.com/tools/MiPhone20140509.exe
ROM Fastboot Redmi 2
http://bigota.d.miui.com/V6.5.2.0.KHJMIC...5d8206.tgz