PhilZ recovery for Micromax A106 Unite 2 Lollipop
Download:
*.A106 Lollipop Recovery (Download)
*.SP flash tool (v5.1352.01 |All versions)
*.Drivers (Download)

Flashing steps:
Step 1: Download and extract files in PC

Step 2: Open A106 Lollipop Recovery folder.
Copy scatter file according to your current ROM i.e. if you have increased app storage to 2.5 GB then copy scatter file from 2.5 GB app storage folder

Step 3: Paste copied scatter file in A106 Lollipop Recovery folder

Step 4: Open SP flash tool (same version which was used to flash ROM).
Click Scatter-loading button

Step 5: Select scatter file from A106 Lollipop Recovery folder.
It will load preloader, uboot, recovery and logo in sp flash tool automatically.

Step 6: Now click Download button in sp flash tool

Step 7: Remove battery from phone and connect to PC via USBcable.
Flashing will take few seconds to complete.
You’ll see Download OK message on successful flashing.

If flashing doesn’t start in few seconds then try flashing with battery (switch off mode).
Also make sure that drivers are installed properly in PC.

How to reboot to recovery?
You can reboot to recovery in several ways.
Use which you think is easiest.

The 1st option mentioned below may not work sometimes if vol keys get damaged.
2nd & 3rd options requires rooted phone and won’t work in non-rooted phones.

1: Switch off phone -> Press and hold vol down + vol up + power button -> Two options will come in screen, press vol up to reboot to recovery

2: Open termial emulator app -> type su and press enter -> type reboot recovery and press enter

3: Open any app which has reboot to recovery option like mobileuncle tools, flashify, rashr, etc and select reboot recovery option.